IEC Optical Probe with RS232-DB9 Interface Optical Probe for Meter

  • Iec Optical Probe With Rs232-db9 InterfaceOptical Probe ...

    TP-232-IEC is an optical probe with infrared and RS232 interfaces. It's widely applied to meter communication such as data reading parameterization in production line on-site service and more.

    Get Price
  • Iec Optical Probe With Rs232-db9 Interface Rs232 Optical ...

    Iec Optical Probe With Rs232-db9 Interface Rs232 Optical Probe For Energy Monitoring With Iec62056-21 (iec1107) Standard Find Complete Details about Iec Optical Probe With Rs232-db9 Interface Rs232 Optical Probe For Energy Monitoring With Iec62056-21 (iec1107) Standard Iec62056-21 (iec1107) Standard Optical Probes Iec Optical Probe With Rs232-db9 Interface Compatible With All Brand And …

    Get Price
  • IEC-OPTICAL-PROBE - Optical probe with DB9 connector for ...

    Interface Measurement and Control Relays. ... Optical probe with DB9 connector for ION8800 meter Show more characteristics. Product selector. IEC-OPTICAL-PROBEIEC-OPTICAL-PROBE has not been replaced. Please contact your customer care centre for more information. Contact Sales.

    Get Price
  • Optical Probe China Optical Probe Suppliers Directory on ...

    optical probe for meters air-conditioner soft starter retail alarms display device EAS parts accessory security system. ... TP-USB-IEC Optical Probe for Data Communication Optical Probe for Reading. TP-232-ANSI Optical Probe with RS232-DB9 Interface. Country/Region: China.

    Get Price
  • electricity optical probe for meter communication sensor ...

    The RJ-OPUSB-IEC optical probes are bi-directional interface devices utilising infra-red light. Connecting to the serial port of a computer or hand-held terminal they permit galvanically isolated communication with utility tariff meters as specified in European Standard IEC 62056-21:2002 (formerly IEC1107:1996).

    Get Price
  • The Optical Probe Optical Head for meter reading and writing

    The optical head for meter reading with RS-232 Signal. The optical head or probe for meter reading is an interface for a bidirectional data exchange between a meter such as power meter gas meter heat meter water meter etc. and periphery device such as and a handheld via infrared optical waves.

    Get Price
  • REDZ probe for meters

    REDZ offers IEC and ANSI probes for all brand of meters. Serial and Bluetooth interfaces are available ... USB RS232 and RS485 Probes Bluetooth Probes Custom Interface Probes Accuracy LED Pulse Collecting Probes Accessories Software. IEC ANSI. ... KMK224 Advanced USB Optical Probe For Honeywell Dolphin CT50/CT60 . 118.50 Eur.

    Get Price
  • METERBUS : IEC 62056-21 optical probe

    Optical probe for the reading of energy counters equipped with an optical port compliant with IEC 62056-21 specifications (former IEC 1107). The optical probes allow you to access the data presnt in the energy gas and water meters that integrate an optical port.

    Get Price
  • ANSI and IEC Optical Probe AIP200 - Landis+Gyr

    ANSI and IEC Optical Probe AIP200. Features Two probes in one Compatible with ANSI C12.18 and IEC 1107 optical ports Reads all Landis+Gyr meter platforms USB interface offers compatibility with the latest PCs Powered via USB connection – no batteries needed Read more. View features Contact Us …

    Get Price
  • IEC 62056-21 Standard Optical Probe For Smart Meter Test ...

    IEC 62056-21 Standard Optical Probe Model: YC-232-IEC-TL The Optical Probe is an optical probe with RS232 interface. It's widely applied to meter infrared communication such as …

    Get Price
  • IEC Optical Probe - Specification - ABACUS ELECTRICS

    The ABACUS ELECTRICS model F9U IEC optical probe is a bi-directional interface utilising infra-red light. Connecting to the USB serial port of a desk-top or lap-top computer it permits galvanically isolated communication with tariff meters as specified in International Standard IEC 62056-21 (formerly IEC …

    Get Price
  • (10pcs/lot) RJ OPUSB IEC Smart Meter Optical Probe Sensor ...

    The optical probes are bi-directional interface devices utilising infra-red light. Connecting to the serial port of a computer or hand-held terminal they permit galvanically isolated communication with utility tariff meters as specified in European Standard IEC 62056-21:2002 (formerly IEC1107:1996).

    Get Price
  • The Optical Probe Optical Head for meter reading and writing

    The optical head for meter reading with RS-232 Signal. The optical head or probe for meter reading is an interface for a bidirectional data exchange between a meter such as power meter gas meter heat meter water meter etc. and periphery device such as and a handheld via infrared optical waves.

    Get Price
  • Abacus Electrics IEC Optical Probes

    The ABACUS ELECTRICS IEC optical probes are bi-directional interface devices utilising infra-red light. Connecting to the serial port of a computer or hand-held terminal they permit galvanically isolated communication with utility tariff meters as specified in European Standard IEC …

    Get Price
  • Interface to meter with IEC 62056-21 optical port.

    Interface to meter with IEC 62056-21 optical port. Dec 03 2010 11:18 am Hi there my electric meter actaris ace 2000 290 Have a IEC 62056-21 optical port for what i read it sends the meter information by infrared I'm planning to build something that can grab that infrared information to arduino..

    Get Price
  • Optical Meter Probes METMOTEC

    METMOTEC's 'STRONGHOLD' IEC standard optical probe for permanent fix applications METMOTEC's optical probes are available with connectors suitable for many hand held computers used in meter reading. Consult METMOTEC for more information if you need probes for Sagemcom meters Siemens ANSI meters or the Ampy 5196.

    Get Price
  • ANSI and IEC Optical Probe AIP200 - Landis+Gyr

    ANSI and IEC Optical Probe AIP200. Features Two probes in one Compatible with ANSI C12.18 and IEC 1107 optical ports Reads all Landis+Gyr meter platforms USB interface offers compatibility with the latest PCs Powered via USB connection – no batteries needed Read more.

    Get Price
  • Meter reading optical probe OP-410 with RS-485 Signals levels

    Meter reading optical probe OP-410 with RS-485 signal level. The optical probe OP-410 is an interface for a bidirectional data exchange between a meter such as power meter gas meter heat meter water meter etc. and a peripheral device via infrared optical waves.

    Get Price
  • Optical Probe For Meter Optical Probe For Meter Suppliers ...

    Alibaba.com offers 314 optical probe for meter products. About 19% of these are other optics instruments 13% are ph meters and 11% are instrument parts & accessories. A wide variety of optical probe for meter options are available to you such as paid samples.

    Get Price
  • IEC-OPTICAL-PROBE - Optical probe with DB9 connector for ...

    Interface Measurement and Control Relays. ... Optical probe with DB9 connector for ION8800 meter Show more characteristics. Product selector. IEC-OPTICAL-PROBEIEC-OPTICAL-PROBE has not been replaced. Please contact your customer care centre for more information. Contact Sales.

    Get Price
  • USB Optical Probe – Hotline Electrical Sales & Service LLC

    We are providing USB Optical Probe for smart metering is an interface for data exchange between a consumption meter (eg electric meter gas meter heating meter water meter etc.) and a peripheral device via infrared optical waves. The optical reading head is manufactured in accordance with the standard IEC 62056-21 (IEC 1107) .

    Get Price
  • METERBUS : RS232 DB9 FEMALE optical probe

    BSC111 probes allow to access to the data present in the energy meter that integrates an optical probe. The data present hier can be read through M-Bus (Meterbus) or DLMS protocol. Main features Optical probes are ideal for the use with all types of meters. An economic solution for the local reading of the meters.

    Get Price
  • THE ANSWER Landis+Gyr TO ALL YOUR AIP200 PROBING …

    then tilt it down towards the meter. The probe will remember its last valid orientation and remain in the corresponding mode while facing downward. Note that for some meters either ANSI or IEC mode can be used (so it is only necessary to correctly align the probe with the meter's optical port). Correct

    Get Price
  • Meter reading via optical Head or probe OP-340 with RS-232 ...

    Meter reading optical probe OP-340 with RS-232 signal level. The Optical Probe OP-340 with RS-232 output is an interface that communicates via infrared waves with a peripheral device such as an electric meter water meter heating meter or gas meter. All devices that support the European standard IEC 62056-21 (IEC 1107) work with this product.

    Get Price
  • RS232-DB9 Optical Probe With IEC Standard - Tespro ...

    TP-232-IEC is an optical probe with infrared and RS232 interfaces. It's widely applied to meter communication such as data reading parameterization in production line on-site service and more. Specifications: Standard: Fully compatible with IEC...

    Get Price
  • MECHANICAL SPECIFICATIONS OPTICAL PROBE

    REDZ KMK111 optical probe is designed in IEC 62056-21 standard and it is compatible with all brands and types of IEC meters. The probe has DB9 Female interface for RS232 connection thus it can easily be used with handheld untis with suitable interface and / or data collector devices. MECHANICAL SPECIFICATIONS Diameter: 32 mm Height: 28 5 mm

    Get Price
  • TL203-232-IEC Optical Probe for AMR Ami Energy Solution

    The optical probe 600007 for smart metering is an interface for data exchange between a consumption meter (eg electricity meter gas meter heating meter water meter etc. ) and a peripheral device via infrared optical waves. The optical reading head is manufactured in accordance With the standard IEC 62056-21 (IEC 1107).

    Get Price
  • OPTICAL-PROBE - Optical probe with DB9 connector for Ion ...

    OPTICAL-PROBE - Optical probe with DB9 connector for Ion 8800 meter. Products. See All Products. See All Products. Looking for product documents or software? Go to our Download Center. Residential and Small Business. ... Interface Measurement and Control Relays. Measurement and Instrumentation.

    Get Price
  • IEC 62056-21 Standard Optical Probe For Smart Meter Test ...

    IEC 62056-21 Standard Optical Probe Model: YC-232-IEC-TL The Optical Probe is an optical probe with RS232 interface. It's widely applied to meter infrared communication such as meter data reading and check or more. l Optical communication adapter according to IEC62056-21 standard (earlier...

    Get Price
  • TP-232 Optical Probe for Meter Communication - Tespro ...

    TP-232 Optical Probe for Meter Communication. In 2002 Tespro designed its first toptical probe TP-232. TP-232 powered from RS232 port without battery. In on-site application Tespro optical probe has been proven more convenience and reliable

    Get Price
  • Meter reading optical reader optical probe IEC ANSI ...

    Meter reading optical reader optical probe IEC ANSI standard magnetical holding reading and writing . With smart metering it is primarily meant to read to communicate and to monitor the consumption data for example from electricity meters gas meters water meters heat meters via PSTN GSM GPRS PLC & LAN economically and environmentally intelligent .

    Get Price
  • Abacus Electrics IEC Optical Probes

    The ABACUS ELECTRICS IEC optical probes are bi-directional interface devices utilising infra-red light. Connecting to the serial port of a computer or hand-held terminal they permit galvanically isolated communication with utility tariff meters as specified in European Standard IEC …

    Get Price
  • Reading your Electricity Meter. IEC 62056-21

    I have a copy of the IEC 62056-21 specs and getting the data out of the meter is relatively simple one you have the optical probe. I hope that this will allow access to the data IEC 1107 optical port for less than $10 rather than the $80-100 everyone seems to charge for the a probe.

    Get Price
  • MARCOM - Optical probe to use with all types of meters

    KMK111-232 - RS232 Optical Probe Optical probes are manufactured according to the IEC 62056-21 (former IEC 1107) standards and they are compatible with all brand and type of meters. RS232 Optical probe to use with all types of meters. It is the economical and easy to integrate solution for local reading of meters with handheld units or laptops with RS232 interfaces.

    Get Price
  • IEC energy meters usb data reading cable IEC 62056 21 ...

    The RJ-OPUSB-IEC optical probes are bi-directional interface devices utilising infra-red light. Connecting to the serial port of a computer or hand-held terminal they permit galvanically isolated communication with utility tariff meters as specified in European Standard IEC 62056-21:2002 (formerly IEC1107:1996).

    Get Price
  • ANSI/IEC compatible probe Smart Energy International

    In support of the company's broad range of single-phase three-phase and bi-directional precision meter products Landis+Gyr has introduced its 2-in-1 AIP200 ANSI & IEC optical probe into the US market. This dual-purpose probe offers utilities greater value for money by combining the ability to read both ANSI C12.18 and IEC 1107 optical ports in one device.

    Get Price
  • Abacus Electrics A9U-P-U04M-2A USB Watthour Meter Probe ...

    Abacus Electrics ANSI type 2 optical probes utilize infra-red LED technology to provide a galvanically isolated bi-directional communications interface between energy meters and laptop computers or handheld devices for onsite data retrieval programming and diagnostics. Works with all primary ANSI meter …

    Get Price
  • RS232-DB9 Optical Probe with IEC standard - Tespro ...

    TP-232-IEC is an optical probe with infrared and RS232 interfaces. It's widely applied to meter communication such as data reading parameterization in production line on-site service and more. Specifications: Standard: Fully compatible with IEC...

    Get Price
  • METERBUS : RS232 DB9 MALE optical probe

    Optical probe for reading of energy meters with IEC 62056-21 protocol (former IEC 1107) - For M-Bus DLMS - DB9 MALE CONNECTOR. My Account. Returning Customers. Remember Me. Forgot your password? Forgot your username? Create an Account ... RS232 DB9 MALE optical probe.

    Get Price
  • IEC Optical Probe - Specification - ABACUS ELECTRICS

    The ABACUS ELECTRICS model F9U IEC optical probe is a bi-directional interface utilising infra-red light. Connecting to the USB serial port of a desk-top or lap-top computer it permits galvanically isolated communication with tariff meters as specified in International Standard IEC 62056-21 (formerly IEC …

    Get Price
  • Optical Probe Optical Head Read Head products from ...

    IEC Optical Probe with USB Interface. ... RS232-DB9 Optical Probe with ANSI standard. Optical Probe for Handheld Mobile Computer. Meter Test Stand TG-MTS. TP-15 Dual-frequency optical scanning probe for accuracy test. TP-16 Optical Scanning Probe for Portable Test Instrument.

    Get Price
  • IEC Optical Probe with USB Interface - Tespro Electronics ...

    Standard: Fully compliant with IEC 62056-21(1107) supporting dlms access application USB & Driver: USB 2.0 standard USB CDROM driver supports all versions of Windows and Vista Maximum B. R.: 19200 bps Fastening: Strong magnetic adhesion...

    Get Price
  • OPTICAL COMMUNICATION PROBES AMOS-USB ... - Applied …

    OPTICAL COMMUNICATION PROBES AMOS-USB AMOS-232P Application: Optical robes AMS-USB and S-232P a e used for local serial communication (readout parametrizing and setting) using infrared communication between static smart electricity meters (meters or other equipment) with optical interface on one side and a PC or HHU (Hand-Held Units) on the ...

    Get Price
  • Usb Optical Probe For Electricity Meter Reading Iec ...

    Usb Optical Probe For Electricity Meter Reading Iec Optical Probe For Water Meter Reading With Iec62056-21(iec1107) Standard Find Complete Details about Usb Optical Probe For Electricity Meter Reading Iec Optical Probe For Water Meter Reading With Iec62056-21(iec1107) Standard Iec62056-21(iec1107) Optical Probes Optical Probe For Meter Reading Usb Optical Probe For Meters from …

    Get Price
  • ANSI Optical Probe - Electro Industries - Power Meters

    The A9U is a new ANSI type 2 zero power optical communication probe. The A9U is a bidirectional interface that utilizes infrared light. This new optical communication probe provides an ANSI rated optical communication interface for programming and reading electric utility meters using a …

    Get Price
  • Iec1107 Optical Probe Rj-opusb-iec Usb Optical Probe For ...

    RJ-OPUSB-IEC optical probe is designed in IEC 62056-21 (former IEC1107) standard based on its model and it is compatible with all brands and types of IEC meters. In addition we offer OEM and retail solutions to companies such as EDMI Landis & Gyr Itron EMH Elster Sensus and many others.

    Get Price
  • China Optical Probe for Smart Meter Reading - China ...

    China Optical Probe for Smart Meter Reading Find details about China Optical Probe Electric Meter from Optical Probe for Smart Meter Reading - Zhuhai Telink Technology Co. Ltd.

    Get Price
  • China Optical Probe for Electricity Meter Reading ...

    China Optical Probe for Electricity Meter Reading Communication Find details about China Electric Meter Flow Meter from Optical Probe for Electricity Meter Reading Communication - Zhuhai Telink Technology Co. Ltd.

    Get Price
  • OPTIGUARD A SMART METER ASSESSMENT TOOLKIT

    Figure 4 Communicating with a Smart Meter using a Optical Probe Meter vendors and utilities already understand the accessibility of a Smart Meter's Optical Port. The ease

    Get Price
  • USB connector black color 2M length IEC62056-21 protocol ...

    Probes are available for use with lap-top or desk-top computers and also for use with a variety of the hand-held computers commonly used for field data collection. The optical probe is manufactured in accordance with the standard IEC 62056-21 (IEC 1107) and is compatible with all consumption meters that support this European standard.

    Get Price
  • Optical Probes - Tespro Electronics

    Talk to the Meters. Founded in 2002 Tespro has been the expert in providing meter testing instruments and equipment and all series of optical probes for both utilities and meter manufacturers. Based on 11 years' experience and fruits Tespro will continue to make its …

    Get Price
  • Meter reading via optical Head or probe OP-340 with RS-232 ...

    Meter reading optical probe OP-340 with RS-232 signal level. The Optical Probe OP-340 with RS-232 output is an interface that communicates via infrared waves with a peripheral device such as an electric meter water meter heating meter or gas meter. All devices that support the European standard IEC 62056-21 (IEC 1107) work with this product.

    Get Price
  • Meter reading optical Head or probe OP-330 with RS-232 ...

    Meter reading optical probe OP-330 with RS-232 signal level. The Optical Probe OP-330 with RS-232 output is an interface that communicates via infrared waves with a peripheral device such as an electric meter water meter heating meter or gas meter. All devices that support the European standard IEC 62056-21 (IEC 1107) work with this product.

    Get Price
  • IEC 62056-21 optical probe for electronic meter - TL-OP232 ...

    232 Optical Probe---600007 600007 is an optical probe with infrared and RS232 interfaces. It's widely applied to meter communication such as data reading parameterization in production line on-site service and more.

    Get Price
  • Meter reading optical Head or probe OP-300 with RS-232 ...

    Meter reading optical probe OP-300 with RS-232 signal level. The optical probe OP-300 is an interface for a bidirectional data exchange between a meter such as power meter gas meter heat meter water meter etc. and a peripheral device via infrared optical waves.

    Get Price
  • Rs232 Optical Probe For Meters Reading Ansi Optical Probe ...

    Rs232 Optical Probe For Meters Reading Ansi Optical Probe For Data Communication According To Ansi C12.18 Type 2 Standard Find Complete Details about Rs232 Optical Probe For Meters Reading Ansi Optical Probe For Data Communication According To Ansi C12.18 Type 2 Standard Ansi C12.18 Type 2 Standard Optical Probes Optical Probe For Meter Reading Rs232 Optical Probe With Ansi Standard …

    Get Price
  • Optical Probe For Meter Communication(id:5969934) Product ...

    Optical Probe For Meter Communication(id:5969934) View quality optical probes optical probe details from Guangzhou GENY Electric Co. Ltd storefront on EC21.com. Buy best Optical Probe For Meter Communication with escrow buyer protection.

    Get Price
  • ANSI and IEC Optical Probe AIP200 - Landis+Gyr

    ANSI and IEC Optical Probe AIP200. Features Two probes in one Compatible with ANSI C12.18 and IEC 1107 optical ports Reads all Landis+Gyr meter platforms USB interface offers compatibility with the latest PCs Powered via USB connection – no batteries needed Read more.

    Get Price
  • Optical Probe probeformeters

    Optical Probe probeformeters 1. 2. About Us REDZ optical probes are the new and better solution for your optical probe needs. REDZ optical probes are designed in IEC 62056-21 or ANSI C12.18 Type standard based on its model and they are compatible with all brands and types of IEC and ANSI meters.

    Get Price
  • Optical communication probes AMOS-USB AMOS-232P with USB ...

    Optical probes AMOS-USB and AMOS-232P are used for local serial communication (readout parametrizing and setting) using infrared communication between static smart electricity meters (meters or other equipment) with optical interface on one side and a PC or HHU (Hand-Held Units) on the other.

    Get Price
  • DLMS/COSEM meters FAQ Gurux for DLMS smart meters

    Reading meters using optical probe. If you want to read your meter using optical probe (optical eye or read-out head) there are few things. 1. Don't buy cheap. There is a reason for the price. 2. Sunlight or powerful light can cause harm. 3. The cable from the readout head must always point downwards. IEC 62056-21 is not DLMS/COSEM

    Get Price
  • Optical Probe K01-USB

    The K1-USB optical probe enables data transfer between devices equipped with a USB interface and consumption meters in accordance with EN 62056 (IEC 1107). Optical reflections in the probe are eliminated as standard; if optical reflections should be desired a "clean" electrical echo in the probe …

    Get Price
  • A9U Zero Power ANSI Optical Probe - Electro Industries

    The A9U is an ANSI type 2 zero power optical communication probe. It is a bidirectional interface that utilizes infrared light. It provides an ANSI rated optical communication interface for programming and reading electric utility meters using either a serial RS232 port or a serial USB port.

    Get Price
  • Optical Probe K01-Blue - petechnik.com

    The K1-BLUE optical probe enables data transfer between devices equipped with a Bluetooth interface and consumption meters in accordance with EN 62056 (IEC 1107). The baud rate and interface parameters can be parameterised via Bluetooth. Three LEDs display the send/receive activity of the optical interface and the state of charge the blue LED ...

    Get Price
  • TP-15 Dual-Frequency Optical Scanning Probe For Accuracy ...

    Tespro Electronics Co. Ltd. is listed in Trade India's list of verified sellers offering supreme quality of TP-11 Optical Scanning Probe For Test-Bench Assembled TP-17 Optical Scanning Probe With Duplex Function IEC Optical Probe with RS232-DB9 Interface etc. Buy Electronic Products & Components in bulk from us for the best quality products ...

    Get Price
  • Optical Probe or optical readout head OP-300

    The Optical Probe OP-300 with RS-232 output is an interface that communicates via infrared waves with a peripheral device such as an electric meter water meter heating meter or gas meter. All devices that support the European standard IEC 62056-21 (IEC 1107) work with this product. The Optical Probe OP-300 with RS232 output and a D-Sub 9pin.

    Get Price
  • RS232-DB9 Optical Probe with ANSI standard - Tespro ...

    Standard: Compliant with ANSI C12.18-1996 standard. Maximum B. R.: 19200 bps Connector: USB or RS232-DB9 interface Mechanical: Impact ABS housing Environment: Application temperature: -20~60 Fastening: Magnetic adhesion (specified by C12.18 )...

    Get Price
  • OPTICAL-PROBE-USB - Optical probe with USB connector for ...

    OPTICAL-PROBE-USB - Optical probe with USB connector for Ion 8800 meter. Products. All Products. Browse Products by Master Ranges. ... Interface Measurement and Control Relays. Motion Control and Robotics. Motor Control Centres. Operator Mechanisms and Disconnect Switches. Pendant Stations.

    Get Price
  • Meter reading optical reader optical probe IEC ANSI ...

    Meter reading optical reader optical probe IEC ANSI standard magnetical holding reading and writing . With smart metering it is primarily meant to read to communicate and to monitor the consumption data for example from electricity meters gas meters water meters heat meters via PSTN GSM GPRS PLC & LAN economically and environmentally intelligent .

    Get Price
  • 62056-21 (IEC1107) Optical Probe from embedded4ever on Tindie

    The optical probe is manufactured in accordance with the standard IEC 62056-21 (IEC 1107) and is compatible with all consumption meters that support this European standard. Optical probe allows you to read smart electricity meter power usage parameters from a PC Raspberry Pi Arduino or microcontroller.

    Get Price
  • PG42-1008C - Elster Solutions

    probe may be used on both ANSI and IEC meter types provided that the orientation of the elements is correct. To operate the ANSI probe on an IEC meter the elements must be inverted 180 ° to properly communicate (Figure 1-2). To ensure proper orientation Elster recommends using the IEC Adapter for ANSI optical probes. See "IEC adapter for ANSI

    Get Price
  • Optical Probe K1-06 - petechnik.com

    The K1-06 optical probe enables data transfer between devices equipped with a serial interface and consumption meters in accordance with EN 62056 (IEC 1107). The probe's signal level is selectable. Optical reflections in the probe are eliminated as standard: if optical reflections should be required a "clean" electrical echo in the probe ...

    Get Price
  • Optical Probes - Tespro Electronics

    Talk to the Meters. Founded in 2002 Tespro has been the expert in providing meter testing instruments and equipment and all series of optical probes for both utilities and meter manufacturers. Based on 11 years' experience and fruits Tespro will continue to make its …

    Get Price
  • Abacus Electrics ANSI Optical Probes

    The ABACUS ELECTRICS ANSI USB Optical Probe model A9U-P-U04M-2A has a new home with TransData Inc. It is available to purchase now. The ABACUS ELECTRICS ANSI optical probes are bi-directional interfaces utilising infra-red light. Connecting to a computer serial port they permit galvanically isolated communication with tariff meters as specified in American ANSI C12.18:2006 standard.

    Get Price
  • Laser Sources 3294/3295 Yokogawa Test & Measurement ...

    What Variations of Optical Interface Cards are Offered by Yokogawa? Are the Optical Interface Cards Modules and Cables all Compatible With Each Other? What is the UDP/IP Employed by the WE7000 Ethernet Module and Do I Need any Special Software to run the Protocol? Which Version of Excel can I use with the WE7000 Control Software?

    Get Price
  • AQ1210 Series Optical Time Domain Reflectometer Yokogawa ...

    What Variations of Optical Interface Cards are Offered by Yokogawa? Are the Optical Interface Cards Modules and Cables all Compatible With Each Other? What is the UDP/IP Employed by the WE7000 Ethernet Module and Do I Need any Special Software to run the Protocol? Which Version of Excel can I use with the WE7000 Control Software?

    Get Price
  • FLUKE-375 FC Fluke 375 FC Clamp Meter Max Current 2.5 ...

    Buy Fluke 375 FC Clamp Meter Max Current 2.5 (Probe) kA ac 600 (Jaw) A ac 600A dc CAT III 1000 V CAT IV 600 V FLUKE-375 FC or other Clamp Meters online from RS for next day delivery on your order plus great service and a great price from the largest electronics components

    Get Price
  • Thermocouple Probes

    Rugged Heavy Duty Transition Joint Thermocouple Probes. The TJ36 Series of thermocouple probes offers Heavy Duty Transition Joint Probes in convenient termination to PFA coated lead wire. Refer chart to get Probe Diameter (A) Transitio... Read More. This …

    Get Price
  • RICE LAKE 2G_C6 - Calibration Services Tektronix

    Tektronix offers quality calibration services for over 140 000 instruments including the RICE LAKE 2G_C6. We offer a variety of calibration service levels including ANSI Z540.1 and ISO/IEC 17025 Accredited. Our nationwide network of labs are ISO 9001 certified and ISO 17025 accredited by A2LA.

    Get Price
  • IEC Optical Probe - Specification

    The ABACUS ELECTRICS model F9U IEC optical probe is a bi-directional interface utilising infra-red light. Connecting to the USB serial port of a desk-top or lap-top computer it permits galvanically isolated communication with tariff meters as specified in International Standard IEC 62056-21 (formerly IEC …

    Get Price
  • RS232 Optical Probe for Energy Metering at Best Price in ...

    The RS232 Optical Probe for Energy Metering is an interface for data exchange between a consumption meter (eg electricity meter gas meter heating meter water meter etc.) and a peripheral device via infrared optical waves. The optical reading head is manufactured in accordance with the standard IEC 62056-21 (IEC 1107) .

    Get Price
  • Test Accessory Manufacturers and Suppliers - China Test ...

    IEC 62056-21 Standard Optical Probe For Smart Meter Test Bench. IEC 62056-21 Standard Optical Probe Model: YC-232-IEC-TL The Optical Probe is an optical probe with RS232 interface. It's widely applied to meter infrared communication such as meter data reading and check or more. l Optical communication adapter according to IEC62056-21...

    Get Price
  • ANSI Type 2 Optical Probe with DTR switch - Specification

    ANSI Type 2 Optical Probe with DTR Switch and USB connector for desk-top and lap-top computers. A9U-P-U04M-2A 2 meter cable The ABACUS ELECTRICS model A9U ANSI optical probe is a bi-directional interface utilizing

    Get Price
  • Intelliprobe Supplier Profile - Ariba Discovery

    Intelliprobe was founded in 2010 with one purpose in mind: to provide high-quality products services and support to customers in the utility meter reading industry. We manufacture optical probes for reading and programming ANSI and IEC electric meters. We carry the most durable mechanical and electrical design in the industry. Our optical probes can be configured to interface with virtually ...

    Get Price
  • Optical Probe for Meter Communication

    Optical Probe for Meter Communication from Guangzhou GENY Electric Co. Ltd on Manufacturer.com. This supplier is located in Guangzhou China in the province of Guangdong.

    Get Price
  • lg 5074 web - Landis+Gyr

    unit is compatible with either ANSI C12.18 or IEC 1107 optical ports and communicates via a USB port to most handheld laptop and desktop computers. So there's no longer a need to carry a number of probes the AIP200 can do it all. Features Include: n Two probes in one n Compatible with ANSI C12.18 & IEC 1107 optical ports n USB interface ...

    Get Price
  • METMOTEC Data Communications Equipment & Consultancy ...

    METMOTEC supplies possibly the world's most comprehensive and competitively priced range of high quality optical probes for meters. The probes are available in IEC 62056-21 ANSI C12.18 and PACT standards. They can be used on hand-held computers for local meter reading or to easily connect meters to modems and LANs.

    Get Price
  • Zvei Probe – TeamWare

    ZVEI – IEC 61107 (IEC 62056-21) optical probe is an interface used to connect PCs and PDAs to electricity and gas tariff meters with galvanically insulated connection. It allows the bidirectional communication between the two devices transmitting with an infrared led and receiving with a phototransistor; the device power supply is provided ...

    Get Price
  • Qualifying FTTH Network before Equipment Installation

    3 Qualifying FTTH Network before Equipment Installation Optical Fiber Interface Inspection Inspecting fiber end face can be performed using two different methods. If the cable assembly is accessible you can insert the connector ferrule into the microscope to conduct the inspection which is generally referred to as a patchcord inspection. If the

    Get Price
  • 38XR-A True-rms Digital Multimeter

    I purchased a 38XR-A meter about 4 years ago to use at work. I use it in an industrial environment building and repairing machinery. This is a full-featured meter that has stood up to hard use here and I have been well satisfied. The price is considerably less than an equivalent Fluke meter too.

    Get Price
  • TP-RF Wireless Optical Probe(id:10278169). Buy China RF ...

    Default baud rate 9600 bps fixed for ANSI standard meters two modes of 300~any/9600bps fixed for IEC Size of RF probe 54L x38Wx35H (mm) Weight 200g Versions TP-RF-IEC: By optical port fully compliant with IEC 62056(DLMS) supporting IEC dynamic Baud rate (IEC 62056-21/46)

    Get Price
  • IEC 60825-2 : 3.2 SAFETY OF LASER PRODUCTS - PART 2 ...

    international electrotechnical committee : pages: isbn: ... test methods - part 1-3: optical power and gain parameters - optical power meter method: iec tr 60825-14 : 1.0 : safety of laser products - part 14: a user's guide ... consumer audio/video equipment digital interface with plastic optical fibre: dd iec pas 61290-3-1 : 2002 : optical ...

    Get Price
  • Amprobe 38XR-A True-RMS Autoranging Digital Multimeter ...

    The Amprobe 38XR-A is a true RMS auto ranging digital multimeter with optical PC interface for engineers designing and troubleshooting industrial automation and control systems. The 38XR-A is a versatile instrument with the features and functions needed for a wide range of applications.

    Get Price
  • USB Optical Probe for Meters Rj-Opusb-IEC (IEC1107 ...

    USB Optical Probe for Meters Rj-Opusb-IEC (IEC1107 Standard Optical Probes)(id:10825861) View quality Optical Probe Optical Probe for Meters IEC1107 Standard Optical Probes details from Zhuhai Ruijing Electronic Technological Co. Ltd storefront on EC21.com. Buy best USB Optical Probe for Meters Rj-Opusb-IEC (IEC1107 Standard Optical Probes) with escrow buyer protection.

    Get Price
  • China USB Optical Probe for Meters Rj-Opusb-IEC (IEC1107 ...

    China USB Optical Probe for Meters Rj-Opusb-IEC (IEC1107 standard Optical probes) Find details about China IEC1107 Standard Optical Probes Optical Probe for Meters from USB Optical Probe for Meters Rj-Opusb-IEC (IEC1107 standard Optical probes) - Zhuhai Ruijing Electronic Technological Co. Ltd

    Get Price
  • Optical Probe – شرکت طرح آزمایان قزوین (ازسال 1378)

    The Optical Probe TAQ-100 with RS-232 output is an interface that communicates via infrared waves with a peripheral device such as an electric meter water meter heating meter or gas meter. All devices that support the European standard IEC 62056-21 (IEC 1107) work with this product. The Optical Probe TAQ-100 with RS232 output and a D-Sub 9pin.

    Get Price
  • Landis+Gyr ANSI probe Transmission & Distribution World

    In support of the company's broad range of single-phase three-phase and bi-directional precision meter products Landis+Gyr has introduced into the U.S. market its 2-in-1 AIP200 ANSI & IEC Optical Probe.

    Get Price
  • M OPTICAL PROBE FOR HONEELL SERIES HANHEL UNITS …

    ANSI meters. The probe has special connector interface to be able to directly connect to ... Electrical Interface RS232 special connector for Honeywell 9900 series Wavelength: ~ 900 nm KMK 142 M OPTICAL PROBE FOR HONEELL SERIES HANHEL UNITS KMK 2 OPTICAL PROBE FOR HONEYWELL 9900 SERIES HANDHELD UNITS SMART COMMUNICATION [email protected]

    Get Price
  • Optical Port Reader - View Specifications & Details by AMI ...

    IRP27 has a highly sensitive infrared and photodiode pair to interface with the optical ports of the meters. The optical probe has been tested with all standard makes of meters. The powerful miniature magnets in the adapter heads have enough strength to stick on to the optical port of IEC and ANSI ports for years together without losing their ...

    Get Price
  • Teledyne LeCroy - HVFO103

    Teledyne LeCroy is a leading provider of oscilloscopes protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types.

    Get Price
  • Optical Probe probeformeters

    Optical Probe probeformeters 1. 2. About Us REDZ optical probes are the new and better solution for your optical probe needs. REDZ optical probes are designed in IEC 62056-21 or ANSI C12.18 Type standard based on its model and they are compatible with all brands and types of IEC and ANSI meters.

    Get Price
  • How to go from serieel to infrared Gurux for DLMS smart ...

    I found an interesting article some time ago about a IEC1107 optical probe it should work also on protocol IEC 62056-21. It's simply an IR tranceiver self-powered on a RS232 (DB9) connection. No 38kHz oscillator modulation at 9600 baud from serial TX/RX pin. Try gooling IEC1107 Electricity Meter Interface it may solve your problem. Fabio

    Get Price
  • HI-6105 Electric Field Probe - ETS-Lindgren

    The EMCenter™ Modular RF Platform along with the EMSense™ interface card can be used with the HI-6000 series field probes as a Field Monitor in addition to its capability as a system level platform. The HI-6113 Laser Data Interface provides the laser power and communications for the HI-6105 Electric Field Probe.

    Get Price
  • Metering is our Business MT860 - Iskraemeco

    IEC 62056 - 21 compliance Real time SCADA Modbus communications protocol Communication RS232 interface RS485 interface CS (20 mA current loop) interface IR (optical port) interface Photovoltaic ready Proven technology highest precision and com-munication modularity make the MT860 the best solution for production and transmission applica-tions.

    Get Price
  • ST5 Installation Guide Rev66D

    The data from the ST-5 can be taken directly through the use of the optical head which is a standard feature. An IEC Optical Communications Interface is needed to use with the optical head (optical probe is sold separately). If more than one ST-5 is required due to volume of meter points or the

    Get Price
  • Tespro Electronics Co. Ltd. Zhuhai - meter testing ...

    Tespro Electronics Co. Ltd. Zhuhai China Manufacturer with main products:meter testing instruments optical probes Portable Tester for Meter Meter Test Stand Optical Scanning Probe

    Get Price
  • SEL-735 Power Quality and Revenue Meter

    SEL-735 Power Quality and Revenue Meter The SEL-735 meter combines leading power quality capabilities with exceptional revenue metering accuracy at an economical price. Power quality reports with IEC 61000-4-30 Class A compliance help identify and …

    Get Price
  • China Optical Probe for Electricity Meter Reading ...

    China Optical Probe for Electricity Meter Reading Communication Find details about China Electric Meter Flow Meter from Optical Probe for Electricity Meter Reading Communication - Zhuhai Telink Technology Co. Ltd.

    Get Price
  • Optical probe - All industrial manufacturers - Videos

    optical probe / RS232 / IEC BSC1111 . ... BSC1111 Key Features RS232 optical probe to use with all types of meters. It is the economical and easy to integrate solution for local reading of meters with handheld units or laptops with RS232 interfaces. ... More information. See the other products Aktif Enerji Ltd.Co.

    Get Price
  • TP-USB-ANSI Optical Probe for Data Communication - Alibaba

    TP-USB-ANSI Optical Probe for Data Communication . TP-USB-ANSI-x is an optical probe for data communication compliant with ANSI C12.18-1996 standard. F eatures are described as below. Versions: By interface there are two categories: 1 TP-232-ANSI-x with RS232 (DB9) interface powered from RS232 and no battery required.

    Get Price
  • China Optical Probe for Smart Meter Reading - China ...

    China Optical Probe for Smart Meter Reading Find details about China Optical Probe Electric Meter from Optical Probe for Smart Meter Reading - Zhuhai Telink Technology Co. Ltd.

    Get Price
  • Product Part Number Guide - Schneider Electric

    Added note to OPTICAL-PROBE-USB part description . 35 ; ... and analog interface to SCADA. ... This probe supports all ION meters with ANSI optical ports except ION8600 meters manufactured before November 2006. CBL-8X00BRKOUT 5ft Breakout Cable: 24-pin female Molex connector to one DB9 female connector for RS-232 and 2 sets of twisted pair

    Get Price
  • BLUETOOTH OPTICAL PROBE FOR ELECTRICITY METERS

    BLUETOOTH OPTICAL PROBE FOR ELECTRICITY METERS Conforms to IEC 62056-21 Standard. It is compatible with all meters protocols produced according to this standard or can be made compatible with the update. Thanks to the smart communication mode determines the meter protocol automatically and reads the meter according to the appropriate protocol.

    Get Price
  • Wholesale Interface Probe - Interface Probe Manufacturers ...

    Wholesale Interface Probe ☆ Find 558 interface probe products from 264 manufacturers & suppliers at EC21. ☆ Choose quality interface probe manufacturers suppliers & exporters now - EC21 ... IEC Optical Probe with RS232-DB9 Interface + 2. Place of origin : China; Tespro Electronics Co. Ltd. ... USB Optical Probe for Meters Rj-Opusb-IEC ...

    Get Price
  • Optical RS232 Cables Products & Suppliers Engineering360

    Find Optical RS232 Cables related suppliers manufacturers products and specifications on GlobalSpec - a trusted source of Optical RS232 Cables information. ... (1000V CAT IV) One red and blue test probe (1000V CAT IV) Optical USB cable US 115V power cord Small Supplier Catalog Go To Website Download Datasheet ... Optical fiber RS232 -DB9 cable .

    Get Price
  • 38XR-A Digital Multimeter Data Sheet

    +IEC publication 1010-1 1000V 600V 54CJ ... True RMS digital multimeter with optical PC interface for engineers designing and troubleshooting industrial automation and control systems. Amprobe Test Tools ... couple probe (TP255A) 9 V battery (installed)

    Get Price
  • Fiber Optics Current Sensor – Free Standing

    Fiber Optics Current Sensor – Free Standing Head: The same aluminum casting design covers all voltage ratings and all currents ratings. The design allows the installation of a second optical sensor head in order to have an extended redundancy level for the system. Primary terminals: Interchangeable as …

    Get Price
  • T/Guard-405 System Fiber Optic Power Transformer Winding ...

    and IEC 60870-5-101 IEC 61000-4-2 ESD IEC 61000-4-3 Radiated RFI IEC 61000-4-4 Burst ... om 1 to 25 meters. Tank wall optical feedthrough designed for tank wall transformers ... • Qualitrol T/Guard gives the exact temperature of optical probes in 250 milliseconds per

    Get Price
  • Vibration Resistant and Bendable RTD (Pt100) Probes with ...

    The PR-26SL design includes a non-threaded PR-26A style probe with a self-gripping spring and 1/2NPT threaded fitting to insure that the probe will contact the bottom of the thermowell bore without damaging the sensor. This insures that the sensor length will always be a perfect fit for your thermowell.

    Get Price
  • Communication by the IEC 62056 protocol - PROMOTIC

    The IEC 62056 standard defines the communication protocols that are designed for electricity consumption measurements data exchanges with electricity meters ... - The IEC 62056-21 standard defines the protocol for serial interface.

    Get Price
  • Fluke 80K-15 High Voltage Probe TestEquity

    Required Meter Input Resistance: 10 Megohm; The Fluke 80K-15 is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 15 000 volts peak AC or DC Overvoltage Category I. This means the probe can only be used to make measurements on energy limited circuits within equipment.

    Get Price
  • Optical Probe for Meters Reading Rj-OP485-IEC Optical ...

    Optical Probe for Meters Reading Rj-OP485-IEC Optical Probe for Data Communication IEC1107(id:10825882) View quality Optical Probe Optical Probe for Meters IEC1107 Standard Optical Probes details from Zhuhai Ruijing Electronic Technological Co. Ltd storefront on EC21.com. Buy best Optical Probe for Meters Reading Rj-OP485-IEC Optical Probe for Data Communication IEC1107 with …

    Get Price
  • A9U Zero Power ANSI Optical Probe - Electro Industries

    The A9U is an ANSI type 2 zero power optical communication probe. It is a bidirectional interface that utilizes infrared light. It provides an ANSI rated optical communication interface for programming and reading electric utility meters using either a serial RS232 port or a serial USB port.

    Get Price
  • TP-15 Dual-Frequency Optical Scanning Probe For Accuracy ...

    Tespro Electronics Co. Ltd. is listed in Trade India's list of verified sellers offering supreme quality of TP-11 Optical Scanning Probe For Test-Bench Assembled TP-17 Optical Scanning Probe With Duplex Function IEC Optical Probe with RS232-DB9 Interface etc. Buy Electronic Products & Components in bulk from us for the best quality products ...

    Get Price
  • Optical Probe - Optical Probe Suppliers Buyers ...

    The optical probe TL-OP232-IEC-C for smart metering is an interface for data exchange between a consumption meter (eg electricity meter gas meter heating meter water meter etc.) and a peripheral device via infrared optical waves. The optical...

    Get Price
  • Features

    Meter total and/or by phase Real time per phase: Voltage current phase angle power factor THD watts VARs VA and frequency Standards Meets ANSI C12.1 UL UL-C File E204142 IEC Optical Communication Interface (Standard Feature) RSM5c approved by California Div. Of Measurement Standards and Maryland Public Service Commission Additional Features

    Get Price
  • Elster Solutions - UNICOM III probe

    Elster offers the UNICOM III probe with the standard two-element ANSI probe interface the standard two-element for IEC FLAG port interface and two-element Euro-Probe for IEC FLAG port interface. UNICOM III probes are available in a variety serial port connectors cable lengths and styles.

    Get Price
  • China Meter Reading Optical Reader Optical Probe IEC ANSI ...

    China Meter Reading Optical Reader Optical Probe IEC ANSI Standard Magnetical Holding Reading and Writing Find details about China Meter Reader Optical Probe from Meter Reading Optical Reader Optical Probe IEC ANSI Standard Magnetical Holding Reading and Writing - Shenzhen Calinmeter Co. Ltd.

    Get Price
  • Faq's - Probe-TEC

    A wireless optical probe is a patent pending device used to read and program electric meters. The wireless optical probe combines infrared communications technology (at the meter optical port) with wireless communications (between the probe and the handheld) and serial communications (between the handheld receiver and the operating system).

    Get Price
  • EMCPro PLUS Thermo Fisher Combination Wave ... ATEC ...

    The KeyTek EMCPro PLUS EMC test system features resident capabilities for EMC CE Mark compliance testing to several IEC/EN standards including IEC 61000-4-2 -4-5 -4-8 -4-9 and -4-12 and fully addresses new requirements for a 100 kHz burst rate per IEC 61000-4-4 Edition 2 (EFT) and 80% dip per IEC 61000-4-11 Edition 2 (PQF™).. Portable and low cost the KeyTek EMCPro PLUS is the answer ...

    Get Price
  • JDSU Test and Measurement Product Offerings for …

    The integrated power meter lets users quickly easily and conveniently measure optical power and attenuation in the field. ... SmartClass Optical Handheld P5000i Probe Certifier40G. 4 A GUIDE TO JDSU PRODUCT OFFERINGS MAP-200 ... fourth-generation instrumentation class of JDSU optical switch technology. With more than 30 years of leadership in ...

    Get Price
  • USB Optical Probe (TL-OPUSB-IEC) at Best Price in Zhuhai ...

    We are into the business of providing a wide range of USB Optical Probe (TL-OPUSB-IEC). The optical probe (TL-OPUSB-IEC) for smart metering is an interface for data exchange between a consumption meter (eg electric meter gas meter heating meter water meter etc.) and a peripheral device via infrared optical …

    Get Price
  • Energy Measurement and Management

    The meter is approved according to IEC 62052-11 and IEC 62053-21 ISO 9001 and designed according to even ... M-bus communication interface for reading up to four sub-meters. Tamper-proof features: ... – Meter View and SMS Client for local/remote meter programming – IR optical probe with a DB9 or an USB connector 722.999.207 0510/22

    Get Price
  • german-metering.de

    Meter reading optical probe OP-305 with RS-232 output signal The Optical Probe OP-305 with RS-232 output is an interface that communicates with a peripheral device such as an electric meter water meter heat meter or gas meter via infrared. Any other device that supports the European standard IEC 62056-21 (IEC 1107) is compatible with this ...

    Get Price
  • Megger BM400/2 Series Insulation ... - electro-meters.com

    Megger BM400/2 Series Insulation Continuity Testers. Applications: Extensive use by electrical contractors. The BM400/2 series designed for flexibility and versatility has a wide variety of applications and is ideal for testing electrical installations to the British and International Wiring Regulations.

    Get Price


Beijing Honour Optics Co., Ltd. All Rights ReservedCopyrightTel:+86-15515862005 Email: [email protected] Address:RM1005, Fudi Plaza, Yanjiao, Beijing East, China, 101601